Tuesday, October 26, 2010


A BIT OF AUTUMN
Part 1

                            “Autumn, the year’s last, loveliest smile.”
                                                                          William Cullen Bryant, 1784-1878

The time periods after summer and  before the winter holidays often leave seasonal
decorating voids in our homes.  So I offer here a colorful, miniature vignette for you
to create to help fill those voids…A Bit of Autumn.
I am fond of small-sized, miniature vignettes that speak of a holiday, a special event
or a season of the year, which can be displayed with ease on a table top or such. 
They can tell a large story in a small space.  You may choose to create my version
of autumn or use my ideas as a jumping off point, filling in with pieces from your
miniature collections.  Whatever, anyone viewing your Autumn vignette is sure to
pick up the scent of a bonfire burning leaves and hunger for a slice of pumpkin pie.

Joann

PS
On a personal note, as the holidays rapidly approach, I would
like to ask you to donate  non-perishable foods to your local
food bank or other such organizaton.  And did you know
that every $1 you donate to your food bank = 7 meals? 
Thank you in advance!
---------------------------------------------------------------------------------

INSTRUCTIONS
Note:  Throughout this project items in bold are what is needed or suggested to
create it. Unless otherwise stated, Crafter’s Pick The Ultimate Glue was used for
adhesion.
                                              
                                                            THE BASE
This little autumn scene sits on a simple base made from a purchased 5” x 7”
picture frame; chose a style that seems appropriate to you.  The one used here
was a rather plain wooden frame that was repainted a light gray and then washed
with black/brown stain for a weathered appearance.  To assemble the base, first
remove everything from the frame.  Paint as desired or leave as is.  Turn the frame
backside up and cut a piece of .080 Davey chipboard to fit the back opening. 
Note: If desired you may just use the original frame backing for this piece
(removing the easel if one is attached) but it will not be as sturdy.  Note:  The
backside of the frame will now be the top of the base as it has a larger area to
work on.   Paint the bottom of the chipboard to match the frame front and the
top of it a dark brown with acrylics/craft paint.  When paint has set, glue the 
chipboard into the rabbet of the frame so the brown side is facing up on what
was the backside of the frame; let glue set.   

Use a fine sifter to sift some full-sized, sterilized potting soil.   Coat the whole
of the top of the chipboard heavily with Crafter’s Pick Ultimate Glue &
immediately sprinkle the sifted potting soil over the glue.  Pat down the soil to make
sure all is well coated and let glue set.  Tap and lightly brush off the loose soil.  
The soil may be lightly sprayed with a non glossy acrylic finish or hairspray.



--------------------------------------------------------------------------------------------------------

RUSTIC WHEELBARROW


                                                       



1.  Cut parts A (bed), B (back), C (sides), D (back support) from .060 (approx.
 1/16" 
 thickness) Davey Chipboard.   Round-off the edges of the short side of back
piece A with sandpaper.

2.  Paint both sides of A, B, C, D pieces with a light gray acrylic.  When paint
is dry, scrape over flat surfaces with a medium toothed razor saw, in the
direction a wood grain would go, to add texture.  Make a mixture of 1/3 black
acrylic and 2/3 Delta Gel Stain MediumPaint this stain mixture on the pieces;
while it is still wet, wipe it back off in the direction of the “wood grain”.  Slightly
dampen a piece of soft toweling & continue to gently wipe off the stain until your
preferred weathered-look is achieved.  Make a half and half mixture of Dark
Burnt Umber acrylic and Delta Gel Stain Medium.  Using a small, stiff
bristled brush apply this brown stain mixture, in a dry-brush method, to add
more weathering, especially in places where it would naturally occur. 

3.  Glue Back Support (D) to outside of back (B), top and bottom edges flush
and centered side to side.  Glue the short edge of bed (A) to the face of B’s
straight side, bottom edges flush and sitting at the angle shown in diagram. 
Glue sides (C) to face of bed & back pieces, outside edges flush. 

4.  Cut 1/16” wide strips of cardstock (at last 13” in total) for faux metal trim 
(You will also use this for axle brackets in step 9).  Paint strip/s with raw sienna 
acrylic and when dry stipple with Burnt Sienna acrylic to achieve a rusted look.  
Glue the “rusted metal” strips to cover the exposed edges of the back and side 
pieces.  For nail heads, use a toothpick to pick up and apply tiny dots of glue to 
the tops of the rusted strips, approx. ¼” apart and centered side to side.  When 
glue has set color with Dark Burnt Umber Acrylic.

5.  Cut two, 4 ½” handles from 3/16”sq. stripwood.  Using the pattern as a
guide, carve and sand the first 1” of each for hand grips.  Cut two legs per
pattern from 1/4” x 1/8” stripwood.  Lightly soften all but the top edges of the
legs with sandpaper.  Paint and weather all four of these pieces as was done
for pieces A-D.  When they are dry, glue them to the underside of the
wheelbarrow bed, as shown.  Add faux, glue-paint nail heads to bottom of
handles as shown in diagram and to handles and legs where they are “nailed”
together.

 6.  Use a razor saw to cut a 5/32” wide wheel rim from an approx. 1-3/8”
diam. rigid,  plastic pill vial, turning the vial as you saw.   Note: to keep the
plastic from cracking, insert a wooden dowel inside the vial first.  Sand the
cut edges smooth. 

    
 7.  For the wheel hubs, use a 1/16” round paper punch to make two holes in 
cardstockCenter a 3/8” diam. flower-shaped paper punch over the holes
and punch out two flower shapes.  Cut six, 3/4"” long spokes from 1/16” diam.
bamboo skewers. Glue the spokes to the face of one of the flower shaped
hubs, as shown in the diagram.  Let the glue set.  Glue the 2nd hub over
spokes, in line with the first hub, & press it down over the spokes.  Let the glue
dry.  Center the plastic rim over the spoke-assembly & draw pencil lines on the
spokes where they touch the rim.  Nip off the spokes to the pencil marks for a
good fit.  Glue the spoke assembly into the rim, centered side to side. 
Let glue set.



8. Cut a 1” length of 1/16” diam. bamboo skewer for the axle.  Slip it into
andthrough the holes in the hub until it extends evenly out both sides.  Glue
a 1/8" grommetor a bell-shaped, jewelry finding (or similar shape, you
need 2 of these) over the axle and to the hubGlue a 3mm round brass bead
(you need 2 of these) to the tips of the axle.  Let the glue set and then paint the
whole wheel assembly rusty, as was described for the wheelbarrow’s top trim.

9.  For axle brackets, cut two, ½” long pieces from the 1/16” cardstock strips 
prepared in Step 4.  With the wheelbarrow upside down, lay the wheel assembly 
on the handles, approx. ¼” back from the un-tapered handle ends (this 
measurement can vary, so check to see that your wheel would turn without hitting
the front of the wheelbarrow, and make adjustments of the axle’s placement if
necessary).  Glue a prepared bracket to the top of the axle, centered where it  
touched the handle; glue it down over the sides of the axle, then glue its ends
down to the handle.  Repeat for the axle on the other side of the wheel. 
These U-shaped brackets will hold the wheel in place.

10.  For braces, cut two strips from lightweight metal (such as tea light
containers), 1 ¼” x 3/32”.  Paint them rusty as with other strips.  Bend the last
1/8” of the ends of each one at a slight angle.  Glue these braces between
piece B and the handle extension in front of it, centered side to side on the
handle, adjusting the angled ends of the braces so they are flush with the
surface they are touching.  Use a dot of Ultimate glue topped with a dot of
cyanoacrylate (Crazy, Super, etc.) glue to hold these braces in place. 
Add faux nail heads where the braces and wheelbarrow meet.

 Note:  The words Swan Farm were added to the sides of the wheelbarrow.  
How this was done will be described  later in this project under “Signs”.

Note:  Click on the pattern sheet for a larger size image.  Save this larger
pattern sheet to your computer and set the printer page size to
7.50" W x 10.38" H to print it out, for  the 1" = 1' original size.   
Or use the 1" Square-Key-To-Scale on the pattern sheet as a guide to
determine the correct or desired size.

 


---------------------------------------------------------------------------------------

                                                           BUSHEL BASKETS


1.  Baskets and bands are cut from manila folder paper.  To prepare paper mix
equalamounts of burnt umber acrylic and Delta Gel Stain Medium.  Use this
mixture to color both side of the paper.  Let dry. 

2.    Cut the spoke/bottom piece & bands from prepared paper.  Paint both
sides of bands with a light wash of green or red acrylic; lay flat and let dry
thoroughly.

3.  Fold the spokes up from the bottom. 

4.  For the large basket, glue one of the larger bands around the outside of
the top of the spokes, top edges flush, pulling the spokes in as evenly as
possible so there is a slight gap between them; the top of the basket will
have a diam of approx. 1-1/2”. Overlap and glue the band end.  Add a 2nd
band to the inside of the basket, in line with the first.  Glue the narrower
band around the outside of the basket, ½” up from its bottom.

5.  For the short basket roll over one of the bands with a round pencil until it
turns on itself. Mark a 1/8” tab on one of this band; glue the end over the tab
to form a ring.  Glue this ring over the tops of the spokes on the basket, top
edges flush, and spokes spaced evenly all around. Curve a second band
strip and glue it to the inside of the spokes, top edges flush with the outer
band; glue ends overlapping.  Curve a third band and glue it around the
outside of the basket, bottom edges flush.  Curve and glue the fourth band
around the outside center of basket.

6.  For handles shape pieces of 24-gauge wire.  Push ends of handles
into top of basket between layers of spokes and bands using a needle
tool to open up space as needed.  If desired 3/16” wide strips of brown
paper sacking may be wrapped, with glue, around tops of the wire
handles.

7.  Fill with apples, pears, corn or other late season produce. 
Hint:  Filling the baskets part way with crumpled paper (or other filler),
of a color close to the produce, means you will not have to create as
much produce.


Save the pattern sheet to your computer.  For correct 1"=1' size set
your printer to 7.51"W x 5.50"H.  Or use the Key-To-Scale given
to adjust to correct size.
-----------------------------------------------------------------------------------------
                                                                PUMPKINS



1.  Crush and roll a piece of
aluminum foil into a dense shape
slightly smaller than the desired size
of finished pumpkin.  Keep in mind
that pumpkins come in many sizes
and shapes.

2.  Use Orange Fimo as is or mix in yellows/golden
browns for a smooth blend of desired color.
Hint: As always, and if possible, it is very helpful to have the
"real thing” in front of you while trying o copy its color.
Working on a non stick surface roll the Fimo, pie crust style,
to an approx. 3/16 thickness.  Wrap this Fimo sheet
around your foil shape, pinching at the top to seal; cut off excess. 
Roll the Fimo covered ball in the palms of your hands to even it out.
 
3.  Poke a needle tool into the “ball” to act as a handle, this will be
the top of your pumpkin;   Indent a mark opposite from the needle
tool to mark the bottom of the pumpkin.  With the back of an X-Acto
knife blade, or similar tool, or even a round toothpick, divide the
pumpkin sides, from top to bottom, into four fairly equal sections. 
Divide each of these sections into three or four more. 
Carefully twist out the needle tool and place the pumpkin on a piece
of glass or ceramic tile.  Touch up indentations as needed on top.
   
4.  Press a dried cherry tomato or grape stem (aha, one more
item to add to your mini-stash) into the top of the pumpkin for a stem. 
Bake your pumpkin/s on the glass according to Fimo package
directions.  Pull stem off and glue back in place.
 
Hint:  For Jack O’Lanterns cut the top off the cooled  pumpkin, pick
out the foil and cut a face into the pumpkin.  A small hole in the
bottom-back of the Jack O’Lantern will allowadding a light.









--------------------------------------------------------------------------------
                                                                 
                                                           
                       GOURDS
Burpee’s catalog describes these as yellow,
orange, green and white fruits.  Some with
stripes and bicolorand shaped like an apple,
orange, pear, bottle, etc. 

Gourds are fun to make as it is hard to go
wrong with so many colors and shapes to
choose from.  Try these ideas:
      -Using a polymer clay or cold porcelain
make a dark green  egg shape.  Lay yellow/white
stripes down the sides, dividing it into approx. 8 sections. 
Smear the snakes into the green. 
- Create a golden pear shape.  Chop the same color clay into   very tiny bits. 
Roll the “pear” into choppings for a very textured surface. 
-Make a golden pear and a mottled green-yellow pear of the same shape
 and size.  Slice each in half crosswise.  Put wrong halves back together to
form two-toned wholes
Gourds may be topped with cherry tomato or grape stems and glossed
after baking/drying.

------------------------------------------------------------------------------------------------------
                                        APPLES







Plain Red Fimo may be used for some apples; a mixture of mainly golden
yellow and Transparent with just a tiny touch of leaf green Fimo will make
Golden Delicious; a mix of Leaf Green & Transparent with a bit of Golden
Yellow Fimo will make green apples.  Form a ball of apple color Fimo shape
as shown, or to your liking.  Cut a snippet of twig from something like a
grapevine wreath and poke one end in a tad of Burnt Umber acrylic paint
Poke the painted end slightly into the bottom of your apple to slightly
indent and add a bit of color.  Now poke it into the top of the apple, swirling
it around a bit to make the top opening a bit wider and leave it in place for
the stem.  After baking, the stem can be snipped to desired length. 
Color may be added to apple by using facial blush or pastel chalks applied
with a tiny make-up sponge.





For quite awhile I have been using groupings of colorful Styrofoam balls cut from
largestems of faux flowers (found in the floral department of craft stores and in
floral shops).  As you can see from the photo these come in a wide variety of colors
and sizes with the color looking to be sprayed on, giving an interesting, realistic
finish.  On a whim Idiscovered that the balls could be manipulated into very realistic
looking individualfruits.  To do this cut or pull the balls apart and then gently squeeze
them into theshape wanted.  A small ball stylus will make indentations in the top and
bottomand a needle tool will poke a stem hole in the top (as needed).  Color may
be added or used to touch up as described above for Fimo apples.  This technique
is the perfectanswer for those that are not fond of working with clays, the results are
very satisfying. 

-----------------------------------------------------------------------------------------------
Here’s hoping you enjoy this project and will find it useful in
whole or part and if you do I think Part 1 should keep you
busy for a week or so when I will add Part 2 of A BIT OF
AUTUMN.   
Let me know what you think, as knowing “you” are out there
does help keep the creative juices flowing!!

I would like to thank all of you who viewed The Consummate
Bibliophile; I was overwhelmed by the response.  A special
thank you to those who took the time to add a comment, it is
much appreciated.

Joann

24 comments:

  1. Wow another great project. I am wondering if I can divide your measurements by 4 and make some of this project in quarter scale. Oh what fun. Congratulations on another great how-to.
    Lyn from Australia

    ReplyDelete
  2. Sounds good to me, Lyn, but oh the patience one needs for quarter scale...if it works for you send some photos!
    Joann

    ReplyDelete
  3. What a great project! I've been collecting back issues of Dollhouse Miniatures for your previous projects. This forum is even better because I can ask questions. It is just wonderful to have you here, Joann.
    Anne
    GSOLFOT

    ReplyDelete
  4. Yes I agree another great project. Went threw all my back issues of DHM marked all your projects what fun! When I finished my project from our Seattle house party I will send you a picture. I am in Joanna Halbert clubs so I have inside help lol. Thanks for taking the time to do this we really love it.
    Janet

    ReplyDelete
  5. Thank you, thank you, thank you!!!!
    I can't express the excitement that we have your great tutorials back.
    Another great one!
    Angelika

    ReplyDelete
  6. Thank you for sharing all of the techniques you do in your blog. I have been wanting to make something like this, and now I will because of all of your wonderful tips! Thanks again.....

    ReplyDelete
  7. Thank you Joann! Another fun project! I love how you made the wheels! I never would have thought of a pill bottle...well, that's why your the queen of DIY! I can't wait to work on the project! Thank you so much for sharing your knowledge with the world, we apreciate you very much.
    JudyK

    ReplyDelete
  8. Oh you have no idea how much I have been missing you! It is soooooo wonderful to see you here! THANK YOU!

    Is there a way I can subscribe to get update notifications by email?

    A side note: There's probably many people who would love to comment but can't because they don't have AIM or Google etc. accounts and the form forces you to pick one before you can submit.

    ReplyDelete
  9. Wonderful project, thank you so much Joann. I'm a great fan of your work! :)
    Evelyne (from Brazil)

    ReplyDelete
  10. Thanks, Joann. I feel like I'm on the edge of a diving board, getting ready to jump. I hope to find a little of the courage that you radiate. Happy Fall.

    Lori in Houston

    ReplyDelete
  11. Joann,
    Thank you so much for another great project! You give of yourself so very much. We all appreciate you.
    Marcie in Montana

    ReplyDelete
  12. Once again, Joann-you rock. Thank you so much! Jennie in Edmonds

    ReplyDelete
  13. LOVE the apples and have always loved your pumpkins, so realistic and fun.

    ReplyDelete
  14. Hi Joann, Love your scene, pumpkins and apples. They look so realistic!

    I also want to thank you for taking the time to share your great talent and helping us learn even more. Your scenes, tutorials and project always bring me joy.

    Thank you again for yet another great project.

    Leilani ~ NYC

    ReplyDelete
  15. Forgot to mention that today is my birthday, just turned the big six zero.

    ReplyDelete
  16. This comment has been removed by the author.

    ReplyDelete
  17. Joann, I would love to get email updates. Is there a way I can get update notifications by email?

    Thanks

    Leilani ~ NYC

    ReplyDelete
  18. I guess you will just have to keep checking back to see what is new...I don't know of any other way...besides you never know wha tyou may find.

    Well Happy Birthday Leilani...we are almost BDay Buds...my birthday is the 5th...ouch, that is tomorrow..and I am well over 60 so feel young!!
    Joann

    ReplyDelete
  19. Thank you for your wonderful project!!
    Is there anyway to print it out so I don't have to work at my computer.... Thanks so much!!

    Gale

    ReplyDelete
  20. Gale, you can copy and paste it to a Word document...highlight the text, right click, click on copy, open a Word document, right click and hit paste....
    hope this works for you,
    Joann

    ReplyDelete
  21. A wonderful project! Love your blog! Thank you for sharing!

    ReplyDelete