Saturday, January 12, 2013

CREATING BOTTLES FROM HOLIDAY TREE LIGHTS




In the winter of 2011, while shopping, a string of LED lights caught my eye because they were bottle-shaped, in an almost perfect scale.  I didn't purchase any at the time but they stayed in the back of my mind.  This year we needed some replacement lights for outdoors and my husband brought home the wrong size…but to my delight they were the exact same shape as the ones I had seen the year before….only a smaller string and less expensive.  Which meant I could justify experimenting with ease and I did….It was fun to see a little project I had in the back of my mind for over a year come to life with ease



I had wanted to get this project out to you as an apropos New Year’s Eve themed project but the holidays were just so filled that miniatures had to take a back seat.  So rather than waiting yet another year to show you these darling bottles, here they are

The only difficult part of this project for you will probably be locating the exact lights but some stores still offer after holiday sales (at better prices) and there are also stores, especially online, that sell Christmas items all year long.  I bought both plain white and multi-colored (green, yellow, red, blue) strings.  Have to confess here, after seeing how well the finished items looked, I bought several of each.   I know I will be using the pieces I make from them for many projects



So, good luck hunting down the lights, your search will be worth the time involved.  And if you can not find these bottle lights now, there is always next Christmas season…and the way retailers seem to work, that is probably not that far off.

Joann

PS
Many of you have seen and tried my many projects that involve turning Lite-Brite pegs and acrylic rods into bottles and glassware but for those that have not, and just in case you are unable to find the bottle lights used here until the next holiday season, I will be including the bottle DIY for both Lite Brite Pegs and acrylic rods.


+++ The Lite Brite Peg/acrylic rod instructions are now included at the end of this post ++++
 ====================


GENERAL INSTRUCTIONS

The first thing to do is remove the bottles from the lights….a quick tug should work.



A fine-tooth razor saw and a matching miter box are used to cut the bottles to size.


The bottles have a textured surface, which is an interesting look, but for some pieces you may want a smoother surface.  To obtain this, simply file/sand the bottle’s sides (emery boards work well here) until the desired finish is accomplished.  Don’t worry about clouding up the finish as a coat of clear nail polish will fix this.  (If you have a Dremel tool and buffing attachments they will also return the finish to a gloss).  Leaving the sanded sides as is will give your bottles a frosted-glass look.









A sharp, pointed blade X-acto knife is used to ream out the insides of the pieces as needed.

Assorted sizes of round paper punches are used to punch rounds from sheet acrylic (look to scraps of blister pack or other heavy plastic packaging ) to create bottoms for glasses.

E-600 glue is used to adhere parts together.

Sharpie Permanent Marker Pens and/or nail polish (white, black and metallic’s) were used to color tops of bottles and to tint acrylic sheeting for glass bottoms as needed.

 Label images are printed onto bright white paper using best settings.  They are adhered to bottles with a smooth coating of Crafter’s Pick Ultimate glue. If desired they may then be painted with a coat of clear nail enamel (do test your printer ink’s compatibility with the enamel before applying to bottle).
=====================

SPECIFIC INSTRUCTIONS


      
 For large 


     BOTT
BOTTLES:  For large bottles, use a fine-toothed saw to remove the lower, smooth section of the bottle.  For shorter bottles, saw to desired height.  File/sand the bottoms smooth.  If the almost invisible side seams bother you, scrape them away with an X-acto knife.  If you want a smoother-sided bottle, file/sand the sides all around.  Leave as is for a frosted look or coat with clear nail enamel or buff to a sheen.


The actual label is smaller than this image.

Carefully cut out a label printie and adhere to bottle, placed as desired, with a light coating of a tacky-type glue that is compatible with plastic.  You may want to get creative and design your own personalized labels…these make fun gifts for friends in miniature.  Note: For a Christmas gift I designed a personalized label for a non-miniature friend and glued them to two bottles.  I drilled holes in the tops of the two bottles, inserted pronged jump rings into the holes with E-600 and then attached hook earwires.  She loved her “designer” earrings!  When time allows I am going to create a charm bracelet.


 SMALL TUMBLERS:  These are made from the bottom sections of the bottles that were removed.  Use an X-acto knife edge  to ream out the inside of the glass-to be until desired thickness is achieved….the thinner the walls the better.   Note: You will find it much easier to prepare them before they are removed from the bottles because you will have more to hold on to and not have to worry about the blade extending out the bottom of the piece.  Sand or scrap the cut edges smooth.
 ===========


MEDIUM-SIZE GLASSES:  As seen, these are cut to include the smooth bottom section of the bottles and approx. 1/8” of the decorative section.  The inside walls are reamed out as, the tops and bottom prepared as described above, for the small tumblers.


==========================



TALL GLASSES:  Cut the bottom section of the bottle off just at the seam between the two sections…this will leave you with a slightly rounded and closed bottom.  Cut it from the bottle at a 3/8” height.   Sand the bottom smooth and check to see if the glass sits straight, making any adjustments needed by filing.  Ream out the inside walls as described for tumblers.  Use clear nail enamel to gloss the insides.

========================

STEMMED GLASSES:  Cut a ½” long section of the bottles, measuring down from the top of the tip.  Ream out insides as described above.  Sand the top edges smooth and the rounded tip flat.  For bottom of stems, punch out a 3/16” round from clear or colored to match, sheet acrylic.  Using E-600, glue the bottoms centered, evenly to the tips, making sure the glasses are sitting straight.  You may find it easier to center the bottoms if you mark the center with a tiny dot.  Treat with clear acrylic as desired or leave as is for a frosted-glass look.





========================

.Shortly, hereafter, I will be adding the instructions, etc. for using Lite Brite Pegs and acrylic rods to create bottles….stay tuned.
+++ As Promised +++
     +++++++++++++++++++++++++++++++++++++++++++


THE FOLLOWING ARE SLIGHTLY EDITED EXCERPTS FROM SOME OF MY DIY ARTICLES FROM OVER THE YEARS THAT INCLUDE CREATING BOTTLE, JARS, GLASSES, ETC.  

Note:  Some of the photos are scanned from older photos so are not the best quality but they should get the “message” across.



From Strawberry Fields Forever, June 2004

SYRUP BOTTLE
Insert the large end of a red Lite-Brite peg into a variable-speed electric drill.  Hold the drill so the peg sits upside down on a flat surface; set the drill on a slow speed, in your other hand , hold a Dremel MultiPro rotary tool fitted with a drum sander to shape the peg as shown.  Keep the revolutions of the tools slow so that heat does not build up and soften the peg.  When the desired shape has been achieved, smooth the peg with fine-grained sandpaper (or buff attachment on Dremel) as it rotates on the drill.  Release the peg from the drill.  Place the piece in a miter box and with a fine-toothed razor saw cut the top and bottom off to achieve size shown.  If you are planning on turning numerous bottles, strap the drill down to a flat surface.
 SET TO PRINT BOTTLE TEMPLATE AT 0.66"W X 1.26"H

Use clear nail enamel to touch up any dull places on the bottle caused by the tools.  Punch a 1/8” round lid from white illustration board.  Glue lid to the to of the bottle and a label to the side.
==========
From Canning Time, September 2003

JAM and JELLY JARS
Cut Lite-Brite Pegs (look for the game replacement pegs at toy/game or 2nd hand shops)in the desired color to desired height with a fine toothed razor saw.  Use red for raspberry, dark pink for strawberry, and purple for grape.  Cut or sand the pegs rounded bottoms smooth and flat.  For jar lids, punch out rounds of gold, silver or glossy white cardstock.  Sandwich two rounds together with glue and adhere to jar top.  Add labels as desired.

==================
From The Coffee Pot Espresso Stand, 2007

CREATING BOTTLE FROM ACRYLIC RODS

The bottle are formed from sections of ¼” diameter plastic rods purchased from Tap Plastics ( www.tapplastics.com or 1-800-246-5055 for mail order.  Store fronts in WA, Or, CA  in USA)  sells acrylic ¼” diameter acrylic rods.  They come in opaque white, fluorescent re-pink and translucent yellow, green, blue, red, blue, purple, clear.  Tap will cut these 6ft. long rods shorter for you for easier mailing.  Note:  This can be a fun group project, purchasing one-each of the colors and sharing rods and cost.   You may also look to found acrylic/plastic items to shape, such as large knitting needles, utensil handles, etc.
SET TO PRINT AT 1.29"W X 1.67"H
------- 
Using the bottle pattern, or your own, as a guide, cut sections of the rod to length with a razor saw.  Insert the cut pieces into a variable speed drill.  With the drill turned on to about a medium speed use various tools, like a Dremel Moto tool with assorted attachments, and or hand carving tools, craft knives, assorted files, and medium grade sand paper to shape the rod to shape desired.  As you experiment with shaping the pieces you will probably find tools that work best to do the job for you.

For some reason or other I like to hold my drill in my lap as I shape the piece but you may feel more comfortable with it on a table top fitted with a non-skid surface such as a mouse pad or you could hold it in place with tape.  Note:  If you plan on doing many of the bottles or for long tern use you can come up with a strap gizmo to hold the drill in place. 

Your first shapes may be a bit wonky but it doesn’t take long to get the procedure down and a rhythm set.  You may also notice that different colors of the rods cut differently.  When the shape pleases you and all is smooth, remove the bottle from the drill.  Use sandpaper to very slightly round-off the bottom edge.  Make sure the piece stands straight and make any needed corrections with sandpaper.  Amy dullness of the acrylic may be buffed out using a buffing attachment on a Dremel tool or may simple be coated with clear nail enamel.  

---------------------


From Harvesttime, A Fresh Produce Stand.
 Septemeber 2000





BOTTLES OF HONEY
The bottles of honey are carved from amber-colored Lite Brite pegs (from the Halsbro Children’s toy; loose packages of these multicolored plastic pegs are often found at thrift stores and refill packs are available at toy stores).  Place the peg in a drill and with the drill turning at a low speed, use various tools to shape the area between the two sections so it is smoothly tapered. Remove the peg and sand the large end of the peg until it is flat….this will be the bottom of the jar.  Place the peg in a miter box and using a razor saw, cut off the top of the peg so the remainder is approx. 5/8” high.  If the “jar is dull, paint with clear nail enamel.  Add a 3/16 round, punched from glossy cardboard for the lid.
--------------
FROM: WET BAR IN A WINE RACK
JANUARY 2002

SET TO PRINT AT 1.99"W X 1.28"H
-----------------
Also check out other blog posts herein for other ideas:   Bottle of Molasses in SUGAR & SPICE Part 2, Dec. 2010; Cleaning supply in May 2011 Creative Minds are Seldom Tidy:  Glasses of juice in Your Invited to a Valentine Party, Feb. 2011.
---------------
Even if you can't find the Christmas Tree Lights right now, this should keep you busy making bottles & jars with materials you can find or may have on hand.  Have fun and let us know how this works for you.

Joann

======================





40 comments:

  1. It's always a delight to follow your blog. I love how the bottles turned out. I'll be looking around to see if I can find the led lights here.
    Thank you for the tutorial and the printies.
    Hugs, Drora

    ReplyDelete
  2. Thanks for the tuto. It's a very good idea!

    ReplyDelete
  3. This is an ingenious idea! Thanks for the tutorial.
    Bye Faby

    ReplyDelete
  4. Absolutely fantastic how you found so many ways to use the 'bottle'. Thank you!

    ReplyDelete
  5. You are a real genius! The bottles and glasses look so realistic!

    ReplyDelete
  6. Thanks for this fantastic turorial.
    I´ll looking for led lights. hope I´m able to find some!
    Greetings
    Melanie

    ReplyDelete
  7. What a brilliant idea - thank you!

    ReplyDelete
  8. great idea , thanks for sharing this tutorial I will keep my eyes open for these lights in Australia

    ReplyDelete
  9. I love these, thank you so much for sharing!!
    Now I just need to find the lights in Australia, or someone who will ship them over!
    How exciting :D

    ReplyDelete
  10. First I was going to "whine" that you should have told us about this idea sooner. There are no leftover Christmas lights left in my area. And then I realized that these look like the LED lights that have been strung around my back porch for a couple of years now. We were disappointed that they weren't lighting correctly this year! Well, now I can just turn them into bottles instead. You've got a good eye, Joanne.

    ReplyDelete
  11. Love your tut, G+'ed it, too.

    I've lots of lights left, just have to see what shape they are :)

    ReplyDelete
  12. Very nice tutorial, thank you!

    ReplyDelete
  13. I love it: just have to check my lights. Thank you so much!

    ReplyDelete
  14. YOU ARE A GENIOUS!!!! Thank you so much for the idea, now I am hunting for lights...to try it on my dollhouses..

    ReplyDelete
  15. oops, I spelled genious wrong....genius...:)

    ReplyDelete
  16. Thanks for the tutorial, I love the bottles. I think that most of the bulbs here are made of glass though, I don´t think that I can cut in those? Does anybody know?

    ReplyDelete
    Replies
    1. Susanne...The bottles are plastic/acrylic. Glass bulbs can be cut but not with a razor saw...they are quite delicate and shatter easily.
      Joann

      Delete
  17. Hello Joann,
    Another great tutorial. i can't wait to try this out. thank you for the great and clear instructions.
    Hugs,
    Giac

    ReplyDelete
  18. this is a great tutorial, I can't wait to try this out..thank you so much

    ReplyDelete
  19. As always Joanne, thank you for the wonderful Tutorial. Who would have thought the lights could be used for bottles. Always a pleasure to come across your articles. I have been a fan for years.
    I enjoy seeing the possible in the impossible, and making something from nothing.

    ReplyDelete
  20. Joanne thank you so much! What a clever idea! You have a real eye for objects and can transform them into wonderful minis! Appreciate your sharing of your wonderful ideas! :D

    hugs,
    Jackie

    ReplyDelete
  21. Thanks for sharing this =) I have a drill but no dremmelthing, so that´s on the miniature-wishlist now =) Then I´m going to do a lot of bottles =)
    Have a nice day, take care!
    /Anna- annasminiatures.blogspot.se

    ReplyDelete
    Replies
    1. Anna, It is nice to have a Dremel Moto Tool,but it is not a must to have to make the bottles. Just put the rod/peg into the drill, set it on med/low and use hand tools to shape the bottles. Super simple...and fun! So go for it and let us know how it works for you.
      Joann

      Delete
  22. Hi Joann, I have SCADS of old Nutshell News magazines that I have found your tutorials in and have used throughout the years... I am always impressed by your creativity and ingenuity. How you think of these things is beyond me!!?? Just thought I'd pass on to you that I am, and always have been a Big Fan of yours!
    elizabeth

    ReplyDelete
  23. LOVE LOVE LOVE your page! as a newbie i would love to see more step by step tutorials with pictures, i'm not as good as you :p

    ReplyDelete
  24. I ran across your post at Pinterest. Your's is the best I have ever seen and I'm so grateful that you were willing to share. You are a very gifted artist.
    Keep up the amazing work. You Bless all of us with your kindness of sharing and your gift of creativity. sincerely, Crystal

    ReplyDelete
  25. Has anyone found these lights? If so, which specific store was selling them or place a link to the online site. I found some Premier Traditions LED lights online, but they have no neck so cannot be made into bottles. Thanks so much for any help!

    ReplyDelete
  26. Hi Joann,

    Thank you so much for sharing your creativeness and awesome mini tuts.

    ReplyDelete
  27. I love the way your mind works. your I.Q. must be 200
    Denise Tucker

    ReplyDelete
  28. What a great tutorial, and as far as I can tell, completely unique!

    ReplyDelete
  29. This comment has been removed by the author.

    ReplyDelete
  30. I want to find exact this type blog and i want to say thanks a lot for sharing this type of content. I want to mention one link where you can buy christmas tree: Home LitesSuperior System

    ReplyDelete
  31. Using the available thinners from National Book Store is quite expensive if your just be needing a small amount, just enough to help the Vitrail Glass Paint to flow smoother. wholesale liquor bottles

    ReplyDelete
  32. thanks for this usefull article, waiting for this article like this again. glassbottlesmanufacturer.com

    ReplyDelete
  33. WOW - its 2020 and I'm just getting into this fascinating hobby. Thanks so much for the helpful tips --- you have an amazing gift of vision and I'm so grateful you have shared that. Regards

    ReplyDelete
  34. Thanks for providing this informative article. Are you looking for exceptional packaging services? We provide durable, protective, and alluring
    Cardboard Food Trays
    Wholesale Food Trays

    ReplyDelete