Saturday, April 19, 2014






THE VILLAGE CHURCH




This little paper structure that I have created for you was originally intended to be a stand-alone project for a bit of Easter whimsy, in the Glitter House genre.  And it turned out as planned…a fun little something to sit on a miniature mantel or center a holiday table, or be placed in a shop window & so on.  But something happened along the way, as often happens while creating… I found I also really liked the looks of the unadorned church. 




So much so that I became intrigued (or carried away) with thoughts of other buildings until soon I had a whole “Little Village” sitting before me, with even more in mind.   Each of no particular scale or style, just fun figments of my imagination. 


  Since I have come to realize from many of you that creating printies directly from Blogs does not give one the high res, desired for the clarity of  detail of the originals, I am at kind of a crossroad as to a solution.  I spend much time on details and it troubles me that you are not getting what I give you.  Suggestions have been made that that I open an Etsy store to offer there, for sale, hard copies of my printies.   So while you work with The Church (it is the least detailed piece of The Village buildings), I will decide what I want to do to make sure that you can have the best of what I do to create with.  Do let me know what you think.

Joann
PS
Go to the end of this post...I have a headache,lol, 
but I was able to add a pdf file
for the church pattern that will enable you to print
it to the correct size, color, and detail of the
original.  You can print it directly from the blog or
save it to your computer.  Do make any necessary
adjustments to your printer, re best settings & paper
type.  Do let me know how this works for you...as great 
as it worked for me I hope.  
Now I have to go lie down for awhile, hahaha.






TO CREATE THE CHURCH YOU WILL NEED:
Color copy of printie on matte presentation paper using best printer settings and using guide to scale key for sizing  +  small sharp scissors (Note: for years I have been using Gingher 4” Embroidery scissors http://www.amazon.com/Gingher-01-005290-Embroidery-Scissors-4-Inc for everything small and own multiple pairs but recently I was turned on to Dr. Slick Razor Scissors http://www.amazon.com/Dr-Slick-Razor-Scissors by Karin Corbin   http://karincorbin.blogspot.com (great blog - be sure to check out her wonderful laser cut Glitter House Kits).  These surgical quality scissors are wonderful, so sharp that they come with a “use at your own risk” warning.  They are perfect for making tiny tight cuts, etc.  Wish I would have known about them years ago…thanks Karin)   +   pointed stylus or similar tool & a straight edge for scoring paper +    +   quality craft glue such as Crafter’s Pick The Ultimate   http://www.amazon.com/Crafters-Pick-Ultimate-Glue  and a quality, acid free  glue stick  http://www.amazon.com/Avery-Purple-Application-Permanent (I like this one because it goes on colored so one can see where the glue is and isn’t and it dries clear) + a brown & a grey water color pencil (such as 



DIRECTIONS:
Print the building on to the white side of matte presentation paper using best printer settings.  Use the 1” sq. Guide to Scale key given to make sure you are printing at the correct size….of course you may choose to print it to other sizes as desired or needed for your purposes.
Carefully cut out the building; score on building sides and side and bottom tab lines.   Fold the sides, side tab and bottom tabs of building in at right angles. Glue sides & bottom together on tabs to form the building. You may choose to use either glue applying carefully with a small brush.  Fold in top tabs at right angles to sides.
Before cutting out the roof piece, score across its center as marked.  Cut out and fold on score line.  Using a matching brown watercolor pencil, color the roof edges, and an approx. 1/8” wide border on the underside and, if needed, the peak of the roof on the score line.  Apply glue to the top tabs of the church and to the underside of the roof where it will touch the church.  Adhere the roof evenly over the top of the building. 

 Working on the steeple, score on sides and tabs & cut out.  Fold side tab in, to right angle and glue side over tab. Glue steeple to church roof, centered front to back.  Fold the steeple roof tabs in at right angles.  Score & fold the steeple roof across the center. Use the brown watercolor pencil to color it as for church roof.  Glue the roof evenly over the steeple.
To add dimension to the church, cut out the door and windows & steps altogether in one piece of the paper, not individually, and glue smoothly, face up, to a scrap of the same paper. When glue has set, cut out individual windows and door.  Color the edges of all gut the step with a grey watercolor pencil and the step with brown.  Glue prepared door and windows over corresponding ones on the building.  Using craft glue, adhere the straight edge of the step just under the door.
If you would like a cross atop your steeple, cut a long 1/32” wide strip from the scrap paper.  Cut it in half and glue one piece evenly across the other piece.  Before cutting out the cross cover the area of the paper that will be the cross with a couple of coats of  clear nail enamel…this will strengthen the paper.  When the enamel is dry carefully trim the top and sides of the cross to approx. size of diagram on project sheet…making bottom cut the last.  Now don’t breathe to hard or you may lose the cross.  Pick the cross up by the top with pointed tweezers, dip the very bottom into strong craft glue and place on peak of steeple roof, centered front to back. Double check to see that all is even. Once the glue has set you may want to add another coat or two of nail polish to further strength the paper.




Now you have the Village Church.  If you want to transform it into a Glitter Structure as seen:

YOU WILL NEED:
Extra fine glitter   http://www.amazon.com/American-Crafts-24-Pack-Extra-Glitter/   (you can use any color/s you want, just make sure it is extra fine…I used apricot on the roofs and sunflower on the building) + a glue stick and a very small flat bristled paint brush to apply it +  A scrap of matboard (1-3/8”w x 1-1/8” deep  used here but may be any size) + grass green acrylic paint + fine model railroad turf such as
& a fine mesh strainer/sifter + green chenille stem + tiny no-hole beads (color of choice for flowers on bushes…I used an orange/copper color) + fine cording/Bunka http://secondchildhoodminiatures.com/supplies.html  

INSTRUCTIONS:
GLITTERING
Use a small, flat-bristled paint brush to apply a thin layer of glue stick, to the buildings first, and then the roofs.  Work on small areas at a time, applying glue and then sprinkling the glitter over it, tapping off excess…you will want a light coating of glitter for this tiny piece as  you are  not  replicating snow.  Do not glitter the door and windows.   Work over a clean sheet of lightweight paper and before you change glitter colors, lift the paper by two sides so you can pour the excess glitter back into its container. 

BASE:
Cut matboard base to size & paint the top and sides a grass green. Glue the church in place on the base, back sides flush and centered side to side.  Draw a path/walkway from church step to front of base, shaped as desired or following diagram. Cut the path shape from a piece of white or off white scrap of the pattern paper (I actually cut mine from a Ralph Lauren paint sample, River Rock-Coastal Sand (love these paints) and pulled off & used the top ply of the paper).


For the lawn, sift the green landscaping turf to get the finest of particles.  Paint the grass area of the base with craft glue and sprinkle on the sifted turf.  Press it a bit for good adhesion and shake or sweep of excess.
For bushes paint a green chenille stem with a darker green than the lawn.  When dry cut 10, approx. ¼” snippets; touch up the exposed wire tip with paint.  
Using pointed tweezers glue the bushes to the lawn, three on each side of the church and two each along the edge of the pathway.  Using a toothpick apply little dabs of craft glue here and there on the bushes and immediately after each dab pick up a group of no-hole beads with the tip of a slightly moistened toothpick (yeah, I used my tongue)  and press them onto the glue. 
If you wish to add Mr. & Ms. Bunny to the scene carefully cut out the images given (I used a magnifying lamp for this job…these eyes are getting old).  Color the edges & back with a grey watercolor pencil and glue in place on path.
The base edges are finished with fine cording/Bunka in a light yellow glued in place, starting and stopping at center back.



May the Easter Bunny leave you a basket filled with love and wishes come true,

Joann


25 comments:

  1. Oh Joann so good to see you posting again!!! I have missed you!! HUGs and a blessed happy resurrection Sunday to you! Thank you for the darling church!!

    ReplyDelete
  2. I love the church, I hope you post the other mini buildings, they would look so cute set up in a dollhouse scene. I think you should keep your set up the way it is. Glad you are back to creating minis for us all to enjoy. Happy Easter.

    ReplyDelete
  3. Oh Joann you have bee. Missed. Happy Hippy Hop pity Easter.

    ReplyDelete
  4. Happy Easter Joann ,it is the first time i visited your page .The church looks really pretty .God bless

    ReplyDelete
  5. Happy Easter Joann. Lovely little project.

    ReplyDelete
  6. Yes please, open an etsy shop, i'd love to purchase from you. Happy Easter and many thanks for your tutorials, i know the effort you put in to them.

    ReplyDelete
  7. Thanks! It's lovely! Happy Easter!

    ReplyDelete
  8. Hi Joann! I see that you GO BIG, even when you GO VERY LITTLE! :D
    Your little church building with the cute rabbit couple in their Sunday Best are so sweet! I can tell that they enjoyed the sermon too! Nice to see you again!

    elizabeth

    ReplyDelete
  9. Joann, You made my Easter. I had so been wondering about you. I am glad to see your words again. Hope all is well with you and yours. Happy Easter! God bless. Lori in Houston

    ReplyDelete
  10. Joann, I echo Lori's comment. I have been worried about you and I am so happy to see your blog again. My mini friends & I have been looking for another project to do together, and I think they will go for this one! I will be happy to get the rest of the village any way I can - an Etsy shop would be cool. Jean Day has one & I'm sure you can pick her brain for setting up a shop there.

    ReplyDelete
  11. Great to see you blogging again! An Etsy shop sounds great, but please have your printies available in the blog too. My printer is quite good!

    ReplyDelete
  12. I'm pleased to discover this lovely project all the more so as I never had any problem with my printer. Thank you very much.

    ReplyDelete
  13. Such a blessed surprise for a lovely Easter afternoon. Thank you.

    ReplyDelete
  14. Welcome Home !!!!
    Hugs, Kathy in Houston

    ReplyDelete
  15. Thank you very much and Happy Easter!

    ReplyDelete
  16. Happy to see you posting again. Have been concerned.
    PS! Thank you for the project too. Hope you had a lovely Easter.

    ReplyDelete
  17. thank you for the wonderful church and Happy belated Easter :)

    ReplyDelete
  18. very cute, thank you for the printable

    ReplyDelete
  19. Es una preciosidad la iglesia, muchas gracias por compartir. Espero que haya tenido una buena Pascua.
    Besos
    Isabel

    ReplyDelete
  20. So nice to see you posting a project again. Love the landscaping, I will have to give it a try. Thank you for the kind words about and the link to my blog.

    Do give Etsy a try, it is has been a good experience for me, very easy to manage. It will certainly keep you very busy keeping up with the scads of orders from all your many fans.

    PS: I do promise to get busy with those birdhouses very soon.
    Karin

    ReplyDelete
  21. I swear I don't know how you do it! Everything is always perfect!

    ReplyDelete
  22. This comment has been removed by a blog administrator.

    ReplyDelete
  23. I love your how toes, They are fun to make and your instructions are very clear.

    ReplyDelete
  24. Problem : all the papercraft PDF download links are broken.

    I wanted to download a couple of your miniature papercraft buildings because they would be great for small spaces on a model railroad but all the download links are broken. Could you please fix the links or is there an alternate download link?

    ReplyDelete